Base oil BS 30/90
Specification
|
|
|
|
Value |
|
|
|
Requirements |
Units |
Minimum |
Maximum |
Typical |
Testing methods |
|
Appearance in temperature of 20oC |
- |
|
|
transparent, without any suspension |
visual
|
|
Kinetic viscosity in the temp. of 100oC not lower than |
mm2/s |
30 |
|
34,5 |
PN-EN ISO3104 ASTM D 445 |
|
Kinetic viscosity in the temp. of 40oC |
mm2/s |
|
|
591 |
PN-EN ISO3104 ASTM D 445 |
|
Viscosity index not lower than |
- |
90 |
|
91 |
PN-79/C04013 ASTM D 2270 |
|
Flow temperature not higher than |
oC |
|
-6 |
-9 |
ASTM D 5950 ASTM D 5985 ASTM D 97 |
|
The ignition temperature not lower than |
oC |
300 |
|
322 |
PN EN ISO 2592 ASTM D 92 |
|
Residue after coking not higher than |
%(m/m) |
|
0,7 |
0,39 |
PN EN ISO 10370 ASTM D 4530 |
|
The acid value not higher than |
mgKOH/g |
|
0,05 |
0,02 |
PN-88/C04049 |
|
Residue after incineration not more than |
%(m/m) |
|
0,01 |
no |
PN EN ISO 6245 ASTM D 482 |
|
Water content |
%(m/m) |
|
|
no |
PN EN ISO 12937 ASTM D 6304 |
|
Corroding action in temp. of 100oC in 3h time, on copper plates |
Corrosion ratio |
|
1 |
1 |
PN EN ISO 2160 ASTM D 130 |
|
Colour not higher than |
Standard number |
|
5 |
3 |
PN-80/04034 ASTM D 1500 |
|
Density in the temp. of 15oC |
g/cm3 |
|
|
0,906 |
PN EN ISO 12185 ASTM D 4052 |